2” Cool Cuff Applications

Mal's-E: Add AH146R Barb Reducer 2 1/2 to 2 to cart

2” Swivel Set
Assembly M & F –
AH45PS

Not in Stock

Mal's-E: Add AH126 2" Male Swivel to cart

AH122PS
2” Female Swivel

Not in Stock

AH120

2” Male

AH126 – 2” Male Swivel Cool Cuff  used to connect to 2” hose to 2” wand tube. Allows hose to swivel at wand connection.


AH120 – 2” Male Cool Cuff can also be used to connect to a 2” wand tube, but will not swivel.

Mal's-E: Add AH120 2" Male to cart Mal's-E: Add AH126 2 in. Male Swivel to cart

AH126

2” Male Swivel Cuff

AH120

2” Male Cuff

Mal's-E: Add AH45 2 in.  Male Stater to cart

AH45 – 2” male starter Cool Cuff  is used to connect to the 2” barb or pipe on the recovery tank or machine. The AH122PS 2” female swivel Cool Cuff   will then allow a 2” vacuum hose to be connected to the starter cuff.

AH45
2” Male Starter


AH122PS
2” Female Swivel

Not in Stock

AH152 – 2” Cool Y Assembly is used in the “4 to the Door” set up. Two 2” hoses from the truck mount must each have a AH120 2” male cuffs to connect to the two AH122PS 2” female swivel cuffs. The one 2” hose to the wand will have an AH122PS female swivel cuff  to connect to the AH120 2” male cuff on the Cool Y assembly.

Mal's-E: Add AH120 2" Male to cart Mal's-E: Add AH150  2 in. Y with 3 clamps to cart AH120 AH122

AH120
2” Male

AH122PS
2” Female Swivel

Not in Stock

AH150
2” Y

AH152 Y 2 in. SS
with 3 Hose Clamps
and hose pieces

Mal's-E: Add AH152 Y 2 in. SSwith 3 Hose Clampsand hose pieces to cart

This Cool Cuff™ AH146R Barbed Reducer cuff enables you to connect a larger  2.5″ diameter vacuum hose to a standard 2″ vacuum hose. Simply push the barbed end inside your 2.5″ hose (just like a typical barbed insert for traditional vinyl cuffs) then thread/spin on a 2″ AH120 Cool Cuff™ Male . Then simply connect to Cool Cuff™ Female Swivel  on your 2″ vac hose and you are up and running, properly reduced with no vacuum loss.

AH146R
Barbed Reducer 2.5” to 2”

Mal's-E: Add AH120 2" Male to cart

AH120
2” Male

Here is the standard application of the 2” Swivel Cool Cuffs to connect two sections of 2” vacuum hose. An AH120 2” male Cool Cuff is connected to one hose and an AH122PS 2” female swivel  Cool Cuff  on the other hose. The smooth bore creates less turbulence and resistance to the air flow increasing the velocity of the air flow at the tool.
(2” Swivel Cool Cuff Set M & F – AH45S)

Back

Back

Van     Job 2.5” 2” 2.5” Female 2” Male Reducer Mal's-E: Add AH155 2.5 in Female to 2 in. Male Reducer to cart

AH155   
2.5” Female to
2” Male Reducer